Momentary Floor Protection – A Product Guide

Your floors need particular protection when undergoing remodeling, throughout new construction, moving heavy furniture or equipment, and for other events beyond day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can value 1000’s of dollars in replacement and repair costs. This article describes surface protection products for floors with the intention to make knowledgeable choices on the best product to make use of for your needs.

Types of Protection Packaging:

Floor protection products are commonly packaged as either:

(1) Products by the roll: These include widespread adhesive films, rolled paper products and rolled textile protection. Protective supplies bought by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick up to 48 mils thick).

(2) Products by the sheet: These embody corrugated plastic, masonite, and different rigid protection. Protective materials bought by the sheet are commonly measured in thickness by the inch (e.g., 1/four-inch thick) and usually come as 4 ft by eight feet.

Type of Flooring Protection:

Paper

Paper protection is suitable for all hard surfaces and resilient surfaces but doesn’t work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable in order that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to secure them to flooring and tapes can often depart adhesive residue when removed. Frequent paper protection products embody:

· A coated compressed paper board 38 mils thick that’s breathable, water-resistant and made from recycled paper.

· Kraft paper is a lightweight brown paper that’s inexpensive but does not afford any impact protection and might easily tear

· Scrim paper might incorporate coatings or reinforcements to make them waterproof as well as scrim threads to strengthen the paper and prevent tearing. These improved papers are longer lasting than common Kraft paper or rosin paper however they are also too thin to offer a lot impact protection.

· Rosin paper is thicker than Kraft paper and could be very low cost. Rosin paper is recycled, felt paper that ranges from 9.0 to 11.5 mils thick. The massive drawback of utilizing Rosin paper is that it could cause a permanent stain if the paper gets wet. Rosin paper may rip simply so it not usually beneficial for use

· Corrugated cardboard rolls or sheets can be used to protect flooring. Corrugate provides impact protection however it will not be coated with a water-proof end and should be kept dry at all times in order that it does not disintegrate. Cardboard products are also available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.

Polyethylene Film

Polyethylene (PE) films are sold as self adhesive rolled films various from 2.0 up to 3.5 mils in thickness. They trap any moisture from escaping in order that they should not be used on any floors which can be curing. Two of the great benefits of polyethylene films are that films will flex and contour to allow them to be used on carpets as well as hard surfaces. These films do not provide any impact protection and are usually rated for brief term use of 30 to ninety days only. Polyethylene films are designed for one-time use and don’t use recycled supplies making them a poor choice in maintainable protection. Protection films are available in a wide range of adhesion “tack”. Hard surface protection films can have a decrease tack and color than carpet protection which needs a more aggressive glue to hold onto carpet fibers successfully.

Wood Products

Plywood and Masonite are commonly used as protection on commercial projects with lots of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an precise sheet of thin wood. Each plywood and Masonite are sold in the standard size of 4 toes by eight feet and are more expensive per sq. foot than paper or polyethylene products. Masonite is commonly 1/8 or 1/four inch thick. Plywood is commonly 1/four inch to three/four inch thick. Each products provide impact protection on a variety of floor types and provide adequate protection towards heavy equipment use or furniture moving. Both plywood and Masonite are breathable and reusable however they are bulky to carry and store. These wood sheets needs to be used on top of a softer protection similar to a rolled textile as they easily scratch flooring. These sheets work well to protect carpet as they forestall wrinkles when rolling heavy loads over the carpet. Plywood and Masonite do not supply moisture protection and can be harder to chop to dimension than different protection types.

If you enjoyed this post and you would such as to get more info pertaining to correx floor protection kindly see our web site.

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *