Non permanent Floor Protection – A Product Guide

Your floors need special protection when undergoing remodeling, during new construction, moving heavy furniture or equipment, and for other events beyond day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can price hundreds of dollars in replacement and repair costs. This article describes surface protection products for floors in an effort to make knowledgeable choices on the most effective product to make use of to your needs.

Types of Protection Packaging:

Floor protection products are commonly packaged as either:

(1) Products by the roll: These embrace frequent adhesive films, rolled paper products and rolled textile protection. Protective materials purchased by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick up to 48 mils thick).

(2) Products by the sheet: These include corrugated plastic, masonite, and other rigid protection. Protective materials bought by the sheet are commonly measured in thickness by the inch (e.g., 1/4-inch thick) and normally come as 4 feet by eight feet.

Type of Flooring Protection:

Paper

Paper protection is suitable for all hard surfaces and resilient surfaces however does not work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable so that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to secure them to flooring and tapes can typically go away adhesive residue when removed. Common paper protection products embody:

· A coated compressed paper board 38 mils thick that’s breathable, water-resistant and made from recycled paper.

· Kraft paper is a lightweight brown paper that’s inexpensive but doesn’t afford any impact protection and can simply tear

· Scrim paper might incorporate coatings or reinforcements to make them waterproof as well as scrim threads to reinforce the paper and stop tearing. These improved papers are longer lasting than regular Kraft paper or rosin paper nevertheless they are also too thin to offer much impact protection.

· Rosin paper is thicker than Kraft paper and may be very low cost. Rosin paper is recycled, felt paper that ranges from 9.0 to 11.5 mils thick. The huge drawback of utilizing Rosin paper is that it may cause a permanent stain if the paper gets wet. Rosin paper can also rip easily so it not normally really useful to be used

· Corrugated cardboard rolls or sheets can be used to protect flooring. Corrugate provides impact protection nonetheless it is not coated with a water-resistant finish and needs to be kept dry always so that it does not disintegrate. Cardboard products are also available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.

Polyethylene Film

Polyethylene (PE) films are sold as self adhesive rolled films various from 2.0 as much as 3.5 mils in thickness. They trap any moisture from escaping so they shouldn’t be used on any floors which can be curing. Two of the good benefits of polyethylene films are that films will flex and contour so they can be used on carpets as well as hard surfaces. These films don’t supply any impact protection and are usually rated for short time period use of 30 to 90 days only. Polyethylene films are designed for one-time use and do not use recycled materials making them a poor choice in sustainable protection. Protection films are available in quite a lot of adhesion “tack”. Hard surface protection films can have a lower tack and colour than carpet protection which wants a more aggressive glue to hold onto carpet fibers successfully.

Wood Products

Plywood and Masonite are commonly used as protection on commercial projects with lots of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an actual sheet of thin wood. Both plywood and Masonite are sold in the usual dimension of 4 ft by eight toes and are more costly per sq. foot than paper or polyethylene products. Masonite is commonly 1/eight or 1/four inch thick. Plywood is commonly 1/4 inch to three/four inch thick. Both products provide impact protection on quite a lot of floor types and provide adequate protection towards heavy equipment use or furniture moving. Each plywood and Masonite are breathable and reusable nonetheless they are bulky to carry and store. These wood sheets ought to be used on top of a softer protection similar to a rolled textile as they easily scratch flooring. These sheets work well to protect carpet as they stop wrinkles when rolling heavy loads over the carpet. Plywood and Masonite don’t offer moisture protection and could be harder to cut to dimension than different protection types.

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *