Short-term Floor Protection – A Product Guide

Your floors want particular protection when undergoing remodeling, during new development, moving heavy furniture or equipment, and for different events past day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can value thousands of dollars in replacement and repair costs. This article describes surface protection products for floors so that you could make informed decisions on the perfect product to use to your needs.

Types of Protection Packaging:

Floor protection products are commonly packaged as either:

(1) Products by the roll: These embody common adhesive films, rolled paper products and rolled textile protection. Protective materials purchased by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick as much as forty eight mils thick).

(2) Products by the sheet: These embrace corrugated plastic, masonite, and other inflexible protection. Protective materials bought by the sheet are commonly measured in thickness by the inch (e.g., 1/four-inch thick) and normally come as 4 toes by eight feet.

Type of Flooring Protection:

Paper

Paper protection is suitable for all hard surfaces and resilient surfaces but does not work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable so that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to secure them to flooring and tapes can often depart adhesive residue when removed. Frequent paper protection products embrace:

· A coated compressed paper board 38 mils thick that is breathable, waterproof and made from recycled paper.

· Kraft paper is a lightweight brown paper that’s inexpensive however doesn’t afford any impact protection and can easily tear

· Scrim paper could incorporate coatings or reinforcements to make them water-resistant as well as scrim threads to strengthen the paper and forestall tearing. These improved papers are longer lasting than common Kraft paper or rosin paper nevertheless they’re additionally too thin to offer a lot impact protection.

· Rosin paper is thicker than Kraft paper and is very low cost. Rosin paper is recycled, felt paper that ranges from 9.zero to 11.5 mils thick. The large drawback of using Rosin paper is that it might cause a permanent stain if the paper gets wet. Rosin paper may rip easily so it not usually recommended for use

· Corrugated cardboard rolls or sheets may also be used to protect flooring. Corrugate provides impact protection nevertheless it shouldn’t be coated with a water-resistant finish and ought to be kept dry at all times so that it doesn’t disintegrate. Cardboard products are additionally available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.

Polyethylene Film

Polyethylene (PE) films are sold as self adhesive rolled films varying from 2.zero as much as 3.5 mils in thickness. They trap any moisture from escaping so they shouldn’t be used on any floors which can be curing. Two of the nice benefits of polyethylene films are that films will flex and contour to allow them to be used on carpets as well as hard surfaces. These films do not provide any impact protection and are usually rated for brief term use of 30 to ninety days only. Polyethylene films are designed for one-time use and don’t use recycled materials making them a poor choice in sustainable protection. Protection films are available in a variety of adhesion “tack”. Hard surface protection films may have a decrease tack and coloration than carpet protection which needs a more aggressive glue to hold onto carpet fibers successfully.

Wood Products

Plywood and Masonite are commonly used as protection on commercial projects with plenty of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an actual sheet of thin wood. Each plywood and Masonite are sold in the usual dimension of four feet by eight feet and are more expensive per sq. foot than paper or polyethylene products. Masonite is commonly 1/eight or 1/4 inch thick. Plywood is commonly 1/4 inch to three/4 inch thick. Both products provide impact protection on quite a lot of floor types and provide adequate protection towards heavy equipment use or furniture moving. Both plywood and Masonite are breathable and reusable nevertheless they’re bulky to carry and store. These wood sheets ought to be used on top of a softer protection comparable to a rolled textile as they easily scratch flooring. These sheets work well to protect carpet as they forestall wrinkles when rolling heavy loads over the carpet. Plywood and Masonite do not provide moisture protection and can be harder to cut to measurement than other protection types.

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *