Temporary Floor Protection – A Product Guide

Your floors need special protection when undergoing remodeling, during new development, moving heavy furniture or equipment, and for different occasions beyond day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can value 1000’s of dollars in replacement and repair costs. This article describes surface protection products for floors so as to make knowledgeable decisions on the best product to make use of on your needs.

Types of Protection Packaging:

Floor protection products are commonly packaged as either:

(1) Products by the roll: These embody widespread adhesive films, rolled paper products and rolled textile protection. Protective supplies bought by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick as much as forty eight mils thick).

(2) Products by the sheet: These embrace corrugated plastic, masonite, and other inflexible protection. Protective supplies purchased by the sheet are commonly measured in thickness by the inch (e.g., 1/four-inch thick) and usually come as four feet by eight feet.

Type of Flooring Protection:

Paper

Paper protection is suitable for all hard surfaces and resilient surfaces but does not work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable so that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to safe them to flooring and tapes can usually leave adhesive residue when removed. Widespread paper protection products embrace:

· A coated compressed paper board 38 mils thick that’s breathable, water resistant and made from recycled paper.

· Kraft paper is a lightweight brown paper that is cheap but doesn’t afford any impact protection and can simply tear

· Scrim paper may incorporate coatings or reinforcements to make them water-proof as well as scrim threads to bolster the paper and prevent tearing. These improved papers are longer lasting than regular Kraft paper or rosin paper nonetheless they’re also too thin to supply a lot impact protection.

· Rosin paper is thicker than Kraft paper and could be very low cost. Rosin paper is recycled, felt paper that ranges from 9.0 to 11.5 mils thick. The huge drawback of using Rosin paper is that it could cause a everlasting stain if the paper gets wet. Rosin paper may rip simply so it not usually recommended to be used

· Corrugated cardboard rolls or sheets can be used to protect flooring. Corrugate provides impact protection nevertheless it shouldn’t be coated with a water resistant end and ought to be kept dry at all times so that it doesn’t disintegrate. Cardboard products are also available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.

Polyethylene Film

Polyethylene (PE) films are sold as self adhesive rolled films various from 2.0 up to 3.5 mils in thickness. They trap any moisture from escaping so they should not be used on any floors which are curing. Two of the good benefits of polyethylene films are that films will flex and contour to allow them to be used on carpets as well as hard surfaces. These films do not provide any impact protection and are usually rated for short term use of 30 to ninety days only. Polyethylene films are designed for one-time use and don’t use recycled materials making them a poor alternative in sustainable protection. Protection films are available in quite a lot of adhesion “tack”. Hard surface protection films will have a lower tack and color than carpet protection which wants a more aggressive glue to hold onto carpet fibers successfully.

Wood Products

Plywood and Masonite are commonly used as protection on commercial projects with numerous foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an precise sheet of thin wood. Both plywood and Masonite are sold in the usual dimension of 4 feet by eight feet and are more costly per square foot than paper or polyethylene products. Masonite is commonly 1/eight or 1/four inch thick. Plywood is commonly 1/4 inch to 3/four inch thick. Each products provide impact protection on quite a lot of floor types and provide adequate protection against heavy equipment use or furniture moving. Both plywood and Masonite are breathable and reusable however they’re bulky to hold and store. These wood sheets ought to be used on high of a softer protection reminiscent of a rolled textile as they simply scratch flooring. These sheets work well to protect carpet as they stop wrinkles when rolling heavy loads over the carpet. Plywood and Masonite don’t supply moisture protection and can be harder to chop to dimension than different protection types.

If you adored this short article and you would such as to obtain more details concerning correx floor protection kindly visit our web-page.

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *