Temporary Floor Protection – A Product Guide

Your floors need special protection when undergoing remodeling, throughout new development, moving heavy furniture or equipment, and for other events beyond day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can price 1000’s of dollars in replacement and repair costs. This article describes surface protection products for floors with the intention to make informed choices on one of the best product to make use of for your needs.

Types of Protection Packaging:

Floor protection products are commonly packaged as either:

(1) Products by the roll: These embrace widespread adhesive films, rolled paper products and rolled textile protection. Protective materials purchased by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick up to forty eight mils thick).

(2) Products by the sheet: These embrace corrugated plastic, masonite, and other inflexible protection. Protective supplies purchased by the sheet are commonly measured in thickness by the inch (e.g., 1/4-inch thick) and usually come as four toes by eight feet.

Type of Flooring Protection:

Paper

Paper protection is suitable for all hard surfaces and resilient surfaces but does not work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable in order that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to safe them to flooring and tapes can usually go away adhesive residue when removed. Widespread paper protection products embody:

· A coated compressed paper board 38 mils thick that’s breathable, water-proof and made from recycled paper.

· Kraft paper is a lightweight brown paper that’s inexpensive but doesn’t afford any impact protection and might easily tear

· Scrim paper might incorporate coatings or reinforcements to make them water resistant as well as scrim threads to bolster the paper and prevent tearing. These improved papers are longer lasting than common Kraft paper or rosin paper nevertheless they are additionally too thin to supply much impact protection.

· Rosin paper is thicker than Kraft paper and could be very low cost. Rosin paper is recycled, felt paper that ranges from 9.0 to 11.5 mils thick. The large drawback of utilizing Rosin paper is that it might cause a permanent stain if the paper gets wet. Rosin paper can even rip simply so it not usually really helpful for use

· Corrugated cardboard rolls or sheets may also be used to protect flooring. Corrugate provides impact protection nevertheless it shouldn’t be coated with a water-resistant finish and should be kept dry at all times in order that it doesn’t disintegrate. Cardboard products are additionally available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.

Polyethylene Film

Polyethylene (PE) films are sold as self adhesive rolled films various from 2.0 up to 3.5 mils in thickness. They trap any moisture from escaping so they should not be used on any floors that are curing. Two of the great benefits of polyethylene films are that films will flex and contour to allow them to be used on carpets as well as hard surfaces. These films don’t provide any impact protection and are normally rated for short term use of 30 to 90 days only. Polyethylene films are designed for one-time use and do not use recycled materials making them a poor alternative in maintainable protection. Protection films are available in quite a lot of adhesion “tack”. Hard surface protection films could have a decrease tack and shade than carpet protection which wants a more aggressive glue to hold onto carpet fibers successfully.

Wood Products

Plywood and Masonite are commonly used as protection on commercial projects with numerous foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an precise sheet of thin wood. Both plywood and Masonite are sold in the usual measurement of four ft by 8 feet and are more expensive per sq. foot than paper or polyethylene products. Masonite is commonly 1/8 or 1/4 inch thick. Plywood is commonly 1/4 inch to three/4 inch thick. Each products provide impact protection on quite a lot of floor types and provide adequate protection towards heavy equipment use or furniture moving. Both plywood and Masonite are breathable and reusable nonetheless they’re bulky to carry and store. These wood sheets ought to be used on top of a softer protection similar to a rolled textile as they easily scratch flooring. These sheets work well to protect carpet as they forestall wrinkles when rolling heavy loads over the carpet. Plywood and Masonite don’t provide moisture protection and may be harder to cut to size than other protection types.

One Response to Temporary Floor Protection – A Product Guide

  1. Howdy I am so delighted I found your website, I really
    found you by mistake, while I was searching on Aol for something else, Regardless I
    am here now and would just like to say thank you for a remarkable post and a all
    round entertaining blog (I also love the theme/design),
    I don’t have time to read it all at the moment but I have bookmarked
    it and also added in your RSS feeds, so when I have time I will be back to read more,
    Please do keep up the awesome work.

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *